Instruction Manual

Source
Display
Product Description
Product Parameter
Connection direction
Notice the name of the connector
PC
Set-Top Box Game console TV Projector Display
Source Display
Matters Need Attention
1. When handling setting up, do not let the fiber-optic cable be affected by great impact
and side pressure, so that the shell itself will be deformed, which may cause the fiber to be
stuck when in use, and the resolution will be reduced. Or there may be the worst interruption.
In addition, after construction wiring will also occur broken line, so need to pay attention.
2. Check the appearance and performance of the optical fiber before installing the wiring.
Please test the reconstruction on the equipment you need to use to avoid unnecessary
trouble at the later stage.
3. When wiring, please be careful not to tie, or pull the fiber , or use feet and other heavy
objects to press the fiber, the process of breaking through the wall should not be more than
200N, if the fiber is broken, or the core broken, the optical fiber can no longer be used.
4. The optical fiber should have a small amount of surplus at the turning point, make a good
drop bend at the corner, do not let the optical fiber touch sharp objects, the surplus optical
fiber should be wound reasonably and beautiful, when winding the fiber, the force should be
uniform, and the optical fiber should not be subjected to hard bending. So as not to damage
the fiber.
5. When moving, use a line card to be fixed firmly, one at a distance of 1: 15 meters, do not
stretch too much between fixed positions, leaving room for thermal expansion and
cold shrinkage, and in addition, in order to prevent damage to the optical fiber in the
vertical alignment, stick tape between fixed line cards once.
Preface
Cable
disk round
Min
Direction
of dressing
To prevent deterioration and breaking of the internal fiber, always ensure
minimum bending semicircle. When laying, because you pull the cable,
pay attention to torsion and tension to ensure that the bending radius is
above 40mm.
When laying the cable, pay attention to the angle of the machine, etc.,
be careful not to touch the sharp angle of the machine and equipment.
Note when reseating the DVI connector. When inserting or removing
the connector, gently insert it with the connector part. If tension or force
is applied, it may lead to breakage, broken wires, faults.
Be careful not to twist the cable and do not
apply tension on the internal fibre Channel
while loosening the cable.
The DVI connector cannot be suspended, the connector's junction
will be deformed, and the internal fiber may be disconnected.
When handling excess cables, follow the circle winding above the
diameter of 80mm and do not apply pressure to the connector
junction.
Thank you for your purchase. Please read this manual carefully before use. Please use it
according to the content. Please keep this instruction after reading!
This fiber optic DVI cable can transmit the sound of the computer and laptop through DVI
interface to the TV, display and projector with DVI interface, and transmit a maximum length
of 100 meters, the resolution can reach 4K@30Hz.
•Color: Black
•Connector Type: Standard DVI-D 24+1 Type plug
•Highest bandwidth : 4.95Gbps, up to 18Gbps
•Resolution: 4K(3840x2160)@30Hz (Downward compatibility)
•Conductor Material: Tinned Copper+Fiber
•Shell Material: Zinc Alloy
•Shielding: Aluminum Foil+Metal Woven Mesh
•Jacket Material: TPE
•Length:2M / 3M / 5M / 10M / 15M / 20M / 30M / 50M / 100M
The plug and play, without external power supply or signal amplifier, Support Simplified Color
Profile . Small barren waist streamlined metal shell, in line with ergonomics. Fiber-optic
transmission of high-frequency signals, no electromagnetic interference. The outer diameter
4.6mm photoelectric composite cable structure, the wire rod light convenient engineering wiring.
Source:Connect signal output device, such as Set top box, DVD, PC and Game console.
Display:Connect signal input device; such as TV, Projector, Display.
Note: the insertion direction error will cause the
signal to be unable to transmit
Source
Display
Source
Source
Minimum
bending radius
Source
Source
Source
Source