Utilize CL0200/CL0201/CL0202 and CL0085 to create your own Cat6 cord Here you need the following tools: CL0085(crimping tool), CL0200/CL0201/CL0202 Frame : Cat6a/6 plug, T-shape jacket(wire guide), Separator
Step 1: Cut off the separator , wear T-shape jacket and transparent separator frame 1.1 Cut off the separator 1.2 Array the T568B wiring (You can also choose T568A if you need) (refer WIKIPEDIA https://en.wikipedia.org/wiki/TIA/EIA-568#Wiring) 1.
1.4 Wear the T-shape jacket(Wire Guide) Note that the T-shape jacket(Wire Guide) has a direction. Push the T-shape jacket(Wire Guide) and the separator at the root of wire, near the plastic housing of the cable. You can also use the crimping tool to make the wire tips neat. Step 2: Wear the Cat6/Cat6a connector(the following metal connector was for your reference.
Step 3: Use the crimping tool to push the connector
It's done. Any more questions, please contact with us at support@cablecreation.
