Specifications

Wireless Sensor Network
11
Terminal Block Connector:
Bi-Directional Serial datalogger
connection
USB Port:
Computer connection for
configuration
Antenna:
RPSMA antenna connection
Memory:
Can store data table for up to 50
wireless sensors.
Operating Temperature Range:
Terminal Block Pin
-Out:
I/O Name Description
In +12V 12V Supply
n/a GND Supply Ground
i/o DATA/A CPI “A”
i/o B CPI “B”
n/a ISO_GND
CPI Signal Reference
-25° to +50°C (-13° F to + 122°F)
2.2.3 CWB100 Environmental Specifications
Temperature Range:
-25° to +50°C (-13° F to + 122°F)
Humidity Range:
Store and use in non-condensing
(desiccated) environment.
2.2.4 Datalogger Compatibility
The CWB100 is compatible with Campbell Scientific datalogger models
CR800-series, CR1000, and CR3000. These dataloggers use the CRBasic
instruction CWB100() to communicate with the CWB100. See Section 4,
Programming the Datalogger, for programming details.
Datalogger operating systems that support the CWB100 and CWS sensors are:
CR800-Series CR800.Std.21 and higher
CR1000 CR1000.Std.21 and higher
CR3000 CR3000.Std.21 and higher
2.3 CWS220 Specifications
2.3.1 CWS220 Physical Specifications
Dimensions: 15 cm x 6 cm x 4.5 cm (6” x 2.4” x 1.8”)
Weight: 270 g (9.6 oz)