User Guide

ManualsBrandsCable Matters ManualsCables & Interconnects4K DisplayPort to DisplayPort Cable (DP to DP Cable, Display Port Cable) 6 Feet - 4K 60Hz, 2K 144Hz Monitor Support

Contact support@cablematters.com for questions

1) Connect one end of the DisplayPort cable to the computer or video graphics card

2) Connect the other end of the cable to the monitor with DisplayPort

3) Select the DisplayPort input setting from the menu of the connected monitor

4) Select a compatible video resolution and refresh rate from the computer

5) Adjust the computer audio output settings

Model 102005

• !! DEPRESS THE LATCH on the DisplayPort connector to avoid damage when unplugging !!

• DUAL MODE DP++ support required from the graphics card or an active adapter required

• VIDEO RESOLUTION up to 4K x 2K (3840x2160 @ 60Hz) including 2K (2560x1440 @ 60/144Hz) and

HD (1920x1200 @ 60/144Hz)

• 4K COMPATIBLITY requires a 4K equipped computer and display

• AUDIO SUPPORT for LCPM, DTA, and Dolby Digital with compatible equipment

• DPCP COMPATIBLE for viewing protected video content

• Compatible with a USB-C to DisplayPort adapter

4K DisplayPort™ Cable

DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries.

Connection Notes

Summary of content (4 pages)

PAGE 1
Model 102005 4K DisplayPort™ Cable 1) Connect one end of the DisplayPort cable to the computer or video graphics card 2) Connect the other end of the cable to the monitor with DisplayPort 3) Select the DisplayPort input setting from the menu of the connected monitor 4) Select a compatible video resolution and refresh rate from the computer 5) Adjust the computer audio output settings Connection Notes • !! DEPRESS THE LATCH on the DisplayPort connector to avoid damage when unplugging !! • DUAL MODE DP++ su
PAGE 2
Video Settings in Windows 1) 2) Connect the cable to both ends Select the DisplayPort input from the connected display menu 3) 4) 5) Search for Display in Windows Select the video Resolution (if needed) Select to Duplicate or Extend the display 6) Note: Click and drag the program to the display in Extended Mode Select Advanced display settings and select the Display adapter properties 7) 8) Select the Monitor tab and adjust the Screen refresh rate (if needed) Click Apply to save the settings 9) Cli
PAGE 3
Audio Settings in Windows 1) Search for Sound in Windows 2) Select the Playback Tab 3) Select the monitor with DisplayPort audio or external speakers 4) Click on the Configuration button to adjust the audio channels 5) Click on the Properties for advanced settings 6) Click Set Default 7) Click Apply 8) Click OK to save the settings 9) Adjust the volume at the connected display (if needed) • Check that your computer volume is not MUTED or extremely low • Verify that your display supports audio or connec
PAGE 4
Troubleshooting Tips CABLING • Check that all cable connections are secure • Inspect the cable to check that no pins are damaged or bent • Test the cable with a different port or computer, if possible COMPUTER SOURCE • • • • Check for updated OS and video graphics card drivers Try different video resolution and refresh rate settings supported by the monitor Check that the output audio is set and not muted Reboot the computer after making multiple changes CONNECTED DISPLAY • • • • Select the DisplayPort i