Manualshelf

User Guide

ManualsBrandsCable Matters ManualsCables & InterconnectsUSB C to RJ45 Console Cable for Windows and MacBook Pro (Compatible Cisco Console Cable, Rollover Cable) with FTDI 6 Feet
12345678
www.cablematters.com
USB-A/USB-C to RJ45 Console Cable QSG
4
(Network switch, router or other)
1) Identify the COM port assigned by the computer (see above).
2) Plug the USB end of the cable into an available USB port on the computer.
3) Open a terminal window with a Command Line Interface (CLI) terminal utility (HyperTerminal in
Windows 7 or 8) or downloadable terminal emulation software such as PuTTY).
4) Select Serial as the connection type in the terminal emulation software.
5) Plug the RJ45 end of the cable into the console port and turn on the equipment.
6) Set the bps, data bits, parity, stop bits and flow control settings required by the equipment.
(Typical Cisco settings are bps=9600 / data bits=8 / parity=none / stop bit=1 / flow control=none)
7) Consult the equipment documentation for programming the equipment.
Connecting to the Equipment with a Windows computer