Specifications

Appendix 7 V-Link App7-9
NAK: Error Codes
02H: Overrun/Framing error
An overrun or framing error is detected in the received data.
Send the command again.
03H: Parity error
A parity error is detected in the received data.
Send the command again.
04H: Sum check error
A sum error occurs with the received data.
06H: Count error
The memory read/write count is “0.”
0FH: ETX error
No ETX code is found.
11H: Character error
A character not used in the received data is found. (other than 0 to F)
Check the character and send the command again.
12H: Command error
An invalid command is given.
13H: Memory setting error
The address or device number is invalid.