Instruction manual

19
4. When you are nished, this window will pop up.
Pess OK. Click X to close the "TV Wall Calculator"
window.

5. On the Display Output section, Select: Display Output 1, and you will
see that the data has changed automatically.
Then press: (2) Write setting to device.

6. On the Display Output section, Select: Display Output 2, and you will
see that the data has changed automatically.
Then press: (2) Write setting to device.
Repeat this step for Output #3 and Output #4.
Output #5, #6, #7, #8 and #9 are for the DVP19 ONLY – Not used on the DVP14