Instruction manual
10
Unpacking
Remove the DVP14 from the shipping box and examine it for any
signs of shipping damage or missing items (check with package
contents above). All shipping items should be saved if the product
is to be moved or returned for service. Shipping unit back to CE
labs or dealer for service not in the original box may result in
voiding warranty or additional cost.
Placement
Please do not block the sides of this device or stack another de-
vice on the top or bottom of the DVP14. Allow sufcient distance
to adjacent equipment to allow proper ventilation airow.
Connections
We recommend the highest quality cables for both input and
output connections.
1. Turn off the DVP14 and all devices that will be connected
to the DVP14.
2. Connect up to 4 monitors, projectors or other displays that
comes with DVI inputs by using male-to-male DVI cables to
the DVP14 DVI outputs.
3. Connect a device equipped with DVI output (such as PC)
to the DVI input connector of the DVP14.
4. Connect your controlling computer with the DVP14 by a
9-pin RS-232 adapter and then install the software.
5. Turn On the DVP14.
6. Turn On all devices connected to the DVP14 and then set
up the display output through RS-232 and the software
included with the unit.
Installation Procedures