Specifications
7. Application Instructions
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
7-14
command.
Program Example
X0
MOV K10 D10
Ϩʳ When X0 is Off, the content of D10 remain unchanged. If X0 turns On,
the data of K10 is moved to D10 data register.
D
14 CML
S D
Counter transfer
Bit device Word device
Device
Operand
XYMS K H
KnX KnY
KnM
KnS
TCDE F
S
ϨϨϨϨϨϨϨϨϨϨϨ
D
ϨϨϨϨϨϨϨϨ
Counter phase the contents of
S
(01, 10) and have the
contents transferred to
D
. If the content is of Constant K, this
Constant K will be converted to the BIN value automatically.
This command can be used during the counter-phase output.
Program Example
X0
CML K1Y0D10
111111110 0000000
D10
Symbolic bit (0=positive, 1=negative)
1100
Y0Y2Y3Y4Y5Y6Y7Y10Y11Y12Y13Y14Y15Y16Y17 Y1
Trasfer the
counter-phase data
No variation
When X0 is ON, contents of D10, b0~b3, will be counter transferred
to K1Y0.
15 BMOV
S D n Block move
Bit device Word device
Device
Operand
XYMS K H
KnX KnY
KnM
KnS
TCDE F
S
ϨϨϨ
D
ϨϨϨ
n
ϨϨ
Move the contents of the n register, with this n register obtained from
counting the registers within the
S
-assigned numbers, to the n
register within the
D
-assigned number.
If the
n
-assigned points exceed the usage range of this device,
only those that are within the effective range will be moved.
Program Example
X0
BMOV D0 K3D10
n=3
D0
D1
D2
D10
D11
D12
Ϩʳ When X0 is ON, move the contents of the three registers D0~D2, to
their corresponding registers D10~D12.
D
16 FMOV
S D n Multiple points movement
Bit device Word device
Device
Operand
XYMS K H
KnX KnY
KnM
KnS
TCDE F
S
ϨϨ ϨϨϨ
D
ϨϨϨ
n
ϨϨ