Specifications

4. Installation and Wiring

4-11

Ϩʳ Direct mounting

Using the specified dimensions and installing the DVP PLC directly on a vertical flat by M4 screws. Make sure you follow the

installation guidelines to allow proper spacing from other components.

Ϩʳ Parallel connection

%$77(5<

56

32:(5

581

(5525

287

%$77(5<

56

32:(5

/2:9

287

50mm or over

I/O cables

ital extension uni

MPU unit

1. I/O cables of digital I/O extension unit are easier to

be interfered, therefore please keep the I/O cables

away from the output cables and power cables at

least a 50mm or more distance.

2. The digit I/O extension unit can be connected in

parallel, therefore please make sure the I/O cables

be firmly connected to the left extension ports of the

digit I/O extension unit when connecting one digit

I/O extension unit to the other. As for the right

extension ports of the digit I/O extension unit, they

are used for the next extension.

3. The attached standard cable with the digit I/O

extension unit is 80mm. If user desires to work as

the left figure shown, please order the specified

cable (DVPACAB403, 30cm Cable).