Specifications

1. Introduction and Inspections

1-1

1.1. Model Explanation and Peripherals

Thank you for choosing DELTA’ s PLC DVP Series. The DVP Series has main processing units and extension units.

The main processing units offer 14-60 points and the extension units offer 8-32 points. The maximum input/output can be

extended up to 128 points. It also can be used on applications according to INPUT/OUTPUT points, power sources, output

modules, digital/analog exchanges (A/D & D/A converter). In addition, DVP SS Series has the special modules

(AD/DA/PT/TC/XA) used for extending its functions and the maximum special modules can be extended up to 8 units. For

more information on the DVP SS Series, refer to the DVP SS Series user manual.

DVP ES/EX/SS MPU is made from improving the functions and specifications of R/T model structure. The additional

R2/T2 model has wide improvement in commands type and execution speed. Please refer to the detail information about

usable application commands and devices in this manual when using R2/T2 model. The specification in this manual is

major for R2/T2 model so that there are some new commands and functions won’ t be provided for R/T model.

 Nameplate Explanation

V5.5

PLC Model

Input Power Supply Specification

Output Module Specification

Control Code and Serial Number

MCU Version

 Serial Number Explanation

Production number

Production week

Production year 2003

Production factory (TaoYuan Plant)

Version type

Production model