Specifications

9. Troubleshooting and Fault Information

9-4

Device D1067

Error Code

Description

0E18 BCD Conversion Error

0E19 DIVISION (divisor=0)

0E1A Operand bit device exceeds the usage range (including index register E, F)

0E1B The value of square root is negative

 Periodic Inspection

Preventive maintenance is required to operate this DVP series PLC in its optimal condition, and to ensure a long life. Be

sure to observe the following precautions when selecting a mounting location. Failure to observer these precautions may

void the warranty!

 Do not mount the DVP near heat-radiating elements or in direct sunlight.

 Do not install the DVP in a place subjected to high temperature, high humidity, excessive vibration, corrosive

gasses, liquids, airborne dust or metallic particles.

 Periodically check if the wiring and terminals are tight.