Instruction manual

3
Model Name HSW88C Plus
Technical HSW88C Plus HSMR Plus
Role of usage
8x8 true matrix
Transmitter [TX]
Receiver [RX]
HDMI compliance HDMI 1.3c
HDCP compliance Yes
Video bandwidth Single-link 225MHz [6.75Gbps]
Video support 480i / 480p / 720p / 1080i / 1080p60
Audio support Surround sound (up to 7.1ch) or stereo digital audio
HDMI over CAT5
transmission range
Full HD (1080p) – 35m (115ft) [CAT5e] / 40m (130ft) [CAT6]
HD (720p/1080i) – 50m (165ft) [CAT5e] / 55m (180ft) [CAT6]
HDMI equalization N/A 8-level digital rotary control
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±8kV
PCB stack-up 4-layer board [impendence control — differential 100Ω; single 50Ω]
Input
8x HDMI
1x RS-232
1x IR socket for IR receiver
1x RJ-45 [HDMI signal]
1x RJ-45 [Channel control]
1x IR socket for IR receiver
Output
8x RJ-45 [HDMI signal]
8x RJ-45 [Channel control]
9x IR socket for IR blaster
1x HDMI
HDMI Input selection
Push button / IR remote control /
RS-232
Push button / IR remote control
HDMI source control
Controllable via IR pass-through from IR receiver at HSMR Plus to IR
blaster at HSW88C Plus
IR remote control Electro-optical characteristics: τ = 25° / Carrier frequency: 20-60kHz
HDMI connector Type A [19-pin female]
RJ-45 connector WE/SS 8P8C with 2 LED indicators
RS-232 connector DE-9 [9-pin D-sub female]
USB connector
3
Standard type-B [square shape]
3.5mm connector
Earphone jack for IR blaster
[IR Main] IR control on all source
devices
[IR PASS-THROUGH1~8] IR control
on individual source device
Earphone jack for IR receiver
[IR RECEIVER] Receives IR
commands from any IR remote
control
DIP switch [HSW88C]
[SW1~SW8] 2-pin for EDID & audio settings
[SW Main] 4-pin for operation & firmware update
SPECIFICATIONS & PACKAGE CONTENTS
4
Mechanical HSW88C Plus HSMR Plus
Enclosure Metal case
Dimensions
(L x W x H)
Model
440 x 290 x 44mm
[1’5” x 11.4” x 1.7”]
85 x 90 x 25mm
[3.3” x 3.5” x 1”]
Package 530 x 400 x130mm [1’9” x 1’4” x 5”]
Carton
280 x 550 x 420mm [11” x 1’10” x 1’5”]
Weight
Model 3250g [7.2 lbs] 180g [6.3oz]
Package 7.1 kg [15.6 lbs]
Fixedness 1U rack-mount with ears Wall-mount with screws
Power supply AC Power 100-240V Not necessarily required
1
Power consumption 60 Watts [max]
1.5 Watt [max] (provided by
HSW88C Plus)
Operation
temperature
0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Package Contents
1x HSW88C Plus
1x IR blaster
2
1x IR receiver
2x 1U rack mounting-ear
1x IR remote control
2
8x HSMR Plus
8x IR receiver
16x Wall-mounting screws
1x UL AC C13 power cord
1x Instruction Manual
1
The HSMR Plus has been tested extensively and found that it doesn’t require
external power supply. If in rare situation you find it cannot work with the
HSW88C Plus, please use any +5V power adapter to plug in the power jack
and see if it can work. If not, please contact our technical support for further
service.
2
Additional IR remote control and IR blaster cable can be purchased as
optional accessories to control the HDMI sources located separately.
3
USB or RS-232 control must be connected either one at a time. Connecting
both types of cables may cause command confusion.