Product Manual

7) Install the winch handle spring as shown with the
wide end in first and the narrow end out.
8) Install the winch nut and fasten securely in
place. (You will find it helpful to lock the winch from
rotating while tightening the winch nut by care-
fully inserting a small screw driver into the gear
mechansm.)
9) Install the Drill Drive™ winch hub
(NEVER try to use a drill to operate your Drill
Drive™ winch system without this hub securely
installed.
3
!WARNING!
NEVER try to use a drill to operate your lift by ap-
plying rotating force to the winch nut installed in
Step 8. Doing so will cause the brake mecha-
nism to malfunction resulting a sudden and rap-
id lowering of the lift and load possibly resulting
in severe property damage and or bodily injury.
10) Install the storage post for the drill adapter.
For Model 76 Cabinetizer™, bolt it to the angle
flange on the collar.
For Model 70 Gillift™, drill a 13/64” mounting hole
in the angle flange on the winch collar and bolt it in
place.