Product Manual

3) Remove the axle bolt and nut on the winch spool
and set it aside.
5) Remove the standard winch Nut and Spring.
Remove handle by rotating counter clockwise. (You
will find it helpful to lock the rotation of the winch by
carefully inserting a small screw driver into the gear
mechanism)
6) Install the Drill Drive™ winch handle by screwing
it onto the winch drive shaft.
4) Install the winch guard and fasten in place with
the 4
1/2
” Bolt and lock nut provided for the winch
spool axle bolt. (The bolt removed in step 3 above
will be too short.)
-Tighten the lock nut enough to hold securely but
not so much as to compress the which spool hous-
ing.
Use 4
1/2
” bolt
provided
2