Product Manual

ManualsBrandsCabinetizer ManualsHoistsDrill Drive for 76 Cabinetizer Lift — 300-Lb. Capacity

1) Remove the two rear winch mount bolts (leave

the third bolt in place)

2) Install the grip handle as shown. Make sure the

off set is to the left as shown to allow proper opera-

tion of the winch handle.

World’s Best Cabinet Lifts

Installation Guide

Model 1013

Patent 7,484,713

NOTE: This Drill Drive™ Winch System is designed to be compatible with

Genuine GILLIFT™ or Cabinetizer™ Brand Cabinet/Material Lifts manufac-

tured by Telpro Inc. Use in any other application or for any other purpose

may be unsafe and is not recommended.

Paragon Pro Manufacturing Solutions

7251 S 42nd St.

Grand Forks, ND 58201

701-775-0551

Parts included:

A - Grip Handle

B - Winch Guard

C - Dual Drive™ Winch Handle

D - Drill Drive™ Winch Hub

E - Drill Drive™ Adapter and Storage Socket

F - 4 1/2” Bolt

Tools Needed: Adjustable wrench, 1/2” wrench,

9’16” wrench, small screw driver

A B C D E

Form 42-46-00-00 version 2

Summary of content (4 pages)

PAGE 1
World’s Best Cabinet Lifts 1) Remove the two rear winch mount bolts (leave the third bolt in place) Installation Guide Model 1013 Patent 7,484,713 NOTE: This Drill Drive™ Winch System is designed to be compatible with Genuine GILLIFT™ or Cabinetizer™ Brand Cabinet/Material Lifts manufactured by Telpro Inc. Use in any other application or for any other purpose may be unsafe and is not recommended. A B C D E 2) Install the grip handle as shown.
PAGE 2
3) Remove the axle bolt and nut on the winch spool and set it aside. 5) Remove the standard winch Nut and Spring. Remove handle by rotating counter clockwise. (You will find it helpful to lock the rotation of the winch by carefully inserting a small screw driver into the gear mechanism) Use 41/2” bolt provided 4) Install the winch guard and fasten in place with the 41/2” Bolt and lock nut provided for the winch spool axle bolt. (The bolt removed in step 3 above will be too short.
PAGE 3
7) Install the winch handle spring as shown with the wide end in first and the narrow end out. 9) Install the Drill Drive™ winch hub (NEVER try to use a drill to operate your Drill Drive™ winch system without this hub securely installed. 8) Install the winch nut and fasten securely in place. (You will find it helpful to lock the winch from rotating while tightening the winch nut by carefully inserting a small screw driver into the gear mechansm.) 10) Install the storage post for the drill adapter.
PAGE 4
Questions or problems with installing your Drill Drive winch system? Raise Contact us at Paragon Pro Manufacturing Solutions 701-775-0551 sales@paragonpromfg.com Check out our other growing product lines at www.paragonpromfg.com Lower To operate the winch manually and for fine height adjustment, swing out the winch handle and rotate the winch drum. MAKE SURE that a clicking sound is heard indicating that the automatic winch brake is functioning properly.