Product Manual

ManualsBrandsCabinetizer ManualsHoistsDrill Drive for 76 Cabinetizer Lift — 300-Lb. Capacity

Installation Guide

Model 1013

Patent 7,484,713



-





Paragon Pro

Manufacturing Solu�ons

7251 S 42nd St.

Grand Forks, ND 58201

701-775-0551

Parts Included:

A: Winch Handle Fully Assembled

B: Drilldrive Adaptor and Storage Socket

C: Winch Guard

D: Black Winch Hub (Note: Use this part with the 76

containing the Black Winch)

E: Yellow Winch Hub (Note: Use this part with the 76

containing the Chrome Winch)

F: 3/8 x 5 Bolt with 3/8 Nylock Nut & 3/8 Flat Washer

(Note: Use this part with the 76 containing the

Black Winch)

G: 5/16 x 5 Bolt with 5/16 Nylock Nut (Note: Use this

part with the 76 containing the Chrome Winch)

Summary of content (12 pages)

PAGE 1
A Installation Guide Model 1013 B C Patent 7,484,713 NOTE: This Drill Drive Winch System is designed to be compa�ble with Genuine GILLIFT or Cabine�zer Brand Cabinet/Material Li�s manufactured by Telpro Inc and Paragon Pro. Use in any other applica�on or for any other purpose may be unsafe and is not recommended.
PAGE 2
To our valued customer, Thank you for choosing a product by Manufacturing Solutions. We are pleased that we are able to provide equipment to make your work easier. Our efforts are focused on producing the finest quality equipment of which we are capable. We make sure to spend extra time and effort on our design and production in order to reduce your time and effort spent using the product. We take pride in providing the best for our customers.
PAGE 3
CONTENTS Parts Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 2 - 5 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
PARTS INDEX Parts/ Descrip�on/ Quan�ty 71-02 71-00 71-01 71-10 71-09 71-08 71-11 71-12 71-03 60-12 71-04 60-12 Adapter 1 71-00 Dual Drive Winch Handle Assembly 1 71-01 Winch Handle 1 71-02 Spin Knob w/ Fastener 1 71-03 Winch Guard w/ Fasteners 1 71-04 Adapter Storage Socket w/ Fasteners 1 71-08 Drill Drive Bushing Black 1 71-09 Drill Drive Bushing Chrome 1 71-10 Winch Drive Hub 1 71-11 Winch Guard Bolt Chrome 1 71-12 Winch Guard Bolt Black 1 Tools needed for Chrome
PAGE 5
ASSEMBLY 1 2 3 1. Remove the nuts oﬀ the Dual Drive. Set aside the individual parts. 2. At this �me check your Cabine�zer to see which Winch it has. If Black use the Black Drill Drum Bushing. If it has a Chrome Winch then use the Yellow Drill Drum Bushing. 3. Remove the Cabine�zer Collar Assembly and place on the ﬂoor/table to avoid damaging to the product or possible injury. Remove the spool bolt and set aside using a 7/16 wrench and an adjustable wrench. 4 6 5 4.
PAGE 6
ASSEMBLY Cont. 7 7.1 7.2 7. Place the Winch Guard over the Winch. The bolt and nuts used will be determined by which Winch is on the Cabine�zer. 7.1. If you have a Black Winch then you will be using the 3/8 x 5 Bolt with the 3/8 Nylock Nut and 3/8 ﬂat washers. 7.2. If Chrome, insert the 5/16 x 5 Bolt with the 5/16 Nylock Nut. 8 9 8.1 8. Your Cabine�zer should resemble Image 8 at this point. 8.1. Example: This model had a Black Winch, use the 3/8 x 5 Bolt with the 3/8 Nylock Nut and 3/8 ﬂat washers.
PAGE 7
ASSEMBLY Cont. 10 12 11 10. Remove the handle from the Black Winch using a 7/16 Wrench (or a 3/4 Wrench if you have a Chrome Winch). If needed use a ﬂathead screwdriver and place it between the gears to remove the handle nut. Set aside the nut and spring to be reinstalled with the DrillDrive. 11. Spin the handle counter-clockwise to remove the handle. 12. When the Handle is removed, A�ach the appropriate DrillDrive Bushing, as determined in Step 2 on page 2. 13 14 15 13.
PAGE 8
ASSEMBLY Cont. 16 17 18 16. When the Dual Drive Winch Handle is in place, unfold the Handle and turn clockwise while holding the Collar handle with the other hand as it starts �ghtening. 17. Push the handle back in to its res�ng place when done. 18. A�ach the DrillDrive Adapter and Storage Socket to the le� side of the Cabine�zer as shown in the image. 19 20 21 19. Hand �ghten the 10-24 Nut, using a 5/32 allen wrench and a 3/8 wrench. 20. Place the DrillDrive Adapter here as storage.
PAGE 9
WARRANTY PARAGON PRO MANUFACTURING SOLUTIONS INC LIMITED WARRANTY TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be free from defects in material and workmanship under normal use for one year from date of purchase. NOTE: The following components of the PANELLIFT® Model 439 Drywall Lift are warranted to be free from defects in material and workmanship under normal use for three years from date of purchase.
PAGE 10
SAFETY INFORMATION This product contains trace amounts of the following items which are known to cause. These chemicals are not hazerdous under product’s intended use. Please review CAS# for more information.
PAGE 11
PAGE 12
Q uestions about assembly? Can’t find a part? Need some other help? Call us: 1.800.448.0822 701.775.