Food Processor User Manual
GROUNDING
Thisappliancemustbegroundedwhileinusetoprotect
the operator from electrical shock. The appliance
is equipped with a 3-conductor cord and a 3-prong
grounding type plug to t the proper grounding-type
receptacle. The appliance has a plug that looks like
Figure A. An adaptor, Figure B, should be used for
connecting Figure A plugs to two-prong receptacles.
Thegroundingtabwhichextendsfromtheadaptormust
beconnectedtoapermanentgroundsuchasaproperly
groundedoutletboxasshowninFigure Cusingametal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have 3-prong
grounding-type plugs and a 3-pole cord connector
that accepts the plug from the appliance. Use only
extensioncordshavinganelectricalratingnotlessthan
the rating of the appliance. DO NOT use damaged
extensioncords.Examineextensioncordbeforeusing
and replace if damaged. DO NOT abuse extension
cordanddonotyankonanycordtodisconnect.Keep
cordawayfromheatandsharpedges.
Figure A
Figure B
Figure C
Circuit
Grounding
Conductor
Grounding
Prong
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
GROUNDING INSTRUCTIONS
-5--8-
WARNING! Before cleaning, assembling or disassembling the Food
Slicer, make sure the Food Slicer Motor is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
HANDLE CAREFULLY!
KEEP FINGERS AWAY FROM THE BLADE!
NEVER FEED FOOD BY HAND.
ALWAYS USE THE FOOD PUSHER!
Always use completely assembled Food Slicer
with Food Carriage and Food Pusher.
Protective/cut-resistant Kevlar gloves are recommended
whenever handling the Blade!
WARNING!
SHARP BLADE
CLEANING INSTRUCTIONS
1. ALWAYSdisconnecttheappliancefromthepowersourcebeforecleaning.
2. NeverimmersetheMotor Assembly ofthisapplianceinwaterorotherliquid.
3. TheBlade,Food Presser,and Food Tray canallbehandwashedinhotsoapy
water.Becausethesepartscomeincontactwithfood,theyshouldbesanitizedby
beingdippedin a solution of 2 ounces (0.06 L) of unscented non-chlorine bleach
mixedwith 5gallons (19 L)of water. Allow sanitizedparts toairdry. Donot use
harshabrasivestocleananypartoftheFood Slicer.Use extreme caution when
handling or cleaning the Blade, as it is extremely sharp! Do not leave Blade
underwater; trying to handle sharp objects in water can be hazardous. It is
highly recommended to wear cut-resistant Kevlar Gloves when removing,
cleaning and re-installing the Blade.
4. SettheThickness Adjustment Knobto“0”.
5. RemoveFood Presser androtatetheSliding Food Carriageoutofthewayin
ordertoallowforeasyaccesstotheBlade.
6. To remove the Blade hold the Bladewith one
handand usea coin tounlock theBlade Locking
ScrewbyturningitclockwiseFigure 6.Carefullypull
the Blade off and hold it by using the hole in the
centeroftheBlade.
7. CleantheoutersurfaceoftheFood Slicer Body
& Base withadampcloth.Milddetergentorwater
canbeusedtodampenthecloth.Wipeawayfrom
theBlade, NEVERwipe towardthe Blade. Never
immerse Motor Assembly in water or any other
liquid.Donotusesteelwool,abrasivecleaners,or
sharputensilstoclean.
8. Toallowforeasiercleaning, theThickness Adjustment Knobcanbeturned
past “0” to allow the Gauge Plateto slide back. NOTE: Use this feature only
with Blade removed. (After cleaning and before reassembly, reset the Thickness
Adjustment Knobto “0”.)
9. Aftercleaninganddrying,installtheBladeandBlade ScrewtotheMotor Assembly
inreverseorderofstep6.MakesuretheBlade Locking Screwisproperlyengaged
andtightened.RotatetheSliding Food Carriagebacktoitsproperpositionandre-
installtheFood Presser.
Figure 6
Rotate clockwise to remove.
WARNING! Before cleaning, assembling or disassembling the Food
Slicer, make sure the Food Slicer Motor is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
HANDLE CAREFULLY!
KEEP FINGERS AWAY FROM THE BLADE!
NEVER FEED FOOD BY HAND.
ALWAYS USE THE FOOD PUSHER!
Always use completely assembled Food Slicer
with Food Carriage and Food Pusher.
Protective/cut-resistant Kevlar gloves are recommended
whenever handling the Blade!
WARNING!
SHARP BLADE