Technical data

2
One concept – three designs
Product type overview MACH4
B with tear off plate
The label should stick out of the printer for at least 30mm for tearing off.
24 volt battery operation
For the battery operation there is a control PCB with 24 volt battery
access built in instead of the power supply unit. Thus the printer can be
used in a mobile way. The print speed is thereby limited to 100 mm/s.
The battery capacity is sufficient for at least one working day.
P with tear off plate and
dispense function
The label hight when dispending is down to 20 - 200 mm.
C with tear off plate and cutter
Labels or continuous material can already be cut at a height of 12 mm.
Options
RFID Read-Write Unit in preparation
The transfer printers can be additionally equipped with a RFID read and
rewrite transponder in Smart-labels with 13.56 MHz.
Printing method Thermal transfer / Thermal direct
Print resolution dpi 203 300 600
Print speed up to mm/s 200 200 100
Print width up to mm 104 105.6 105.6
Printing method Thermal transfer / Thermal direct
Print resolution dpi 203 300 600
Print speed up to mm/s 200 200 100
Print width up to mm 104 105.6 105.6
Printing method Thermal transfer / Thermal direct
Print resolution dpi 203 300 600
Print speed up to mm/s 200 200 100
Print width up to mm 104 105.6 105.6