Service manual

10 10
2 Replacing Assembly Units
2.5 Replacing the Outer Casing
Danger!
Danger to life and limb from electric shock!
X Disconnect the device from the mains supply before opening the outer casing.
41 32
Fig. 4 Replacing the outer casing
1 Two screws
2 Outer casing
3 Two Screws
4 Cover
The outer casing can be removed complete with the cover.
1. Open the cover (4), remove the roll hub and material.
2. Unscrew 2 screws (1) from the front of the casing.
3. Unscrew 2 screws (3) from the inside of the oor.
4. Remove the outer casing (2) together with the cover (4).
Mount the outer casing with the cover in the reverse order. Hinge up the print module for easier inserting the parts.