Technical data

ManualsBrandsCAB ManualsPrinterCAB EOS4

Touchscreen – LCD display

Clearly designed for highest ease of use.

Three USB interfaces

2 USB interfaces on the operation panel,

1 USB interface on the back side for memory

stick, keyboard, scanner, WLAN or Bluetooth.

Roll holder

The label roll is inserted and centered

automatically when closing the cover.

Ribbon retainer

The stop is adjustable to the ribbon width.

Gap or reflective label sensor

The sensor position is adjustable by the

red knob via a spindle. The set position is

displayed with a LED.

Label guide

The guides are adjusted to the material

width with the green knob.

Printhead

The printhead can be easily removed

by hand for cleaning or replacement.

Print roller

For cleaning or replacement the print roller

can be removed without tools.

Technical data

Electronics

Processor high speed 32 Bit clock rate MHz

400

RAM MB

Memory IFFS MB Flash

Battery buffer for real-time clock with printout of time and date

Data storage on shut-down

Warning signal: acoustic signal in case of error

Interfaces

RS232C 1.200 up to 230.400 Baud/8Bit Option

USB 2.0 full speed device for PC connection

Ethernet 10 / 100 Base T, LPD, RawIP-Printing,

ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP,

TIME, Zeroconf, mDNS, SOAP

Peripheral connection

WLAN USB Stick 54 Mbps Option

Nano Bluetooth USB Adapter V2.1 Option

2 x USB Host on operation panel, connection up to 100 mA

for memory stick, service key, WLAN or Bluetooth

1 x USB Host on the backside connection up to 500 mA

for keyboard, scanner, WLAN or Bluetooth

Operation panel

Touchscreen display 160 x 255 pixels with backlight

Diagonal measurement mm

Operating functions: Pause, Feed, Cancel, Menu, Enter, Numeric Pad

Cutter

Cutting length

from mm

Cuts/min. up to 200

Winding preferably outside

Monitoring cutter pivoted, finalposition not reached

Label dispensing function only EOS4

Label height mm 20 - 100

Printing and

dispensing

with push button on request

automatically after removal of the label

Monitoring Label in dispensing position, dispensing module swivelled

Operating data

Power supply 100 – 240 V ~ 50 / 60 Hz

Energy

consumption

Power saving mode 1,8 W / typic 45 W / max. 100 W

Temperature/

Humidity

Operation: + 5 - 40°C / 10 - 85% not condensing

Storage: + 0 - 60°C / 20 - 80% not condensing

Transport: – 25 - 60°C / 20 - 80% not condensing

Approvals CE, FCC class A, CB, CCC, UL

Printhead

Printing method

Thermal transfer/Thermal direct

Print resolution dpi

203 / 300

Print width up to mm

108 / 105,7

Print speed mm/s

30, 40, 50, 75, 100, 125

Material

on rolls or fanfolded

Labels

Paper, cardboard, textiles,

plastics such as PET, PE,

PP, PVC, PU, acrylate, PI

Thickness mm

Width mm Height

0,055 - 0,7

single lane 10 - 116

multi lane 5 - 116

6 - 1000

liner paper 60 - 110 g/m

0,055 - 0,10

25 - 120 endless

Conti-

nuous

material

cardboard 80 - 180 g/m

0,10 - 0,20

6 - 120

10 - 1000

plastic film PVC 0,30

6 - 60

0,50

6 - 30

flat pressed tubes 0,40 - 0,70

5 - 85

Media roll

at core Ø mm

EOS1

EOS4

Outside Ø mm

38 /40 155

210

76 152,4

203,2

Winding direction

outside or inside

only outside during cutting

All material details are approximate values. Small labels, very thin, narrow,

thick or stiff materials as well as labels with strong adhesives need to be tested.

Please pay attention to the minimum label height when cutting and dispensing.

Settings

Digital or analog clock Time

System settings Date

Print parameters Interfaces

25 language settings Security

On the Display

Data reception Clock

Bluetooth

Ethernet state

Date sheet Cutter

Temperature printhead

Ribbon capacity WLAN

Monitoring

Stop printing if End of ribbon

End of labels

Printhead open

Final position of cutter not reached

cutter pivoted

Test routines

System diagnosis

when switched on incl. printhead testing

Short status,

status print

Font list, device list, WLAN status, profile of label,

test grid, monitor mode, PPP status

Status reports

Printout informing about settings and print length counter,

runtime counter. Status request via software commands.

Status messages on the display such as network error – no

link, barcode error, etc.

Fonts

Font types

5 Bitmap fonts incl. OCR-A, OCR-B and 3 Vector fonts Swiss

721, Swiss 721 Bold and Monospace 821 available internally,

loadable TrueType fonts. Thai and Chinese (simplified Chinese)

Character sets

Windows 1250 up to 1257, DOS 437, 737, 775, 850, 852, 857,

862, 864, 866, 869, EBC DIC 500, ISO 8859-1 to -10 and -13

up to -16, WinOEM 720, UTF-8, Macintosh Roman, DEC MCS,

K0I8-R. All West and East European Latin, Cyrillic, Greek,

Hebrew and Arabic, Thai and Chinese characters are

supported

Bitmap fonts

Size of width and height 1 – 3 mm, Zoom 2 – 10

Orientation 0°, 90°, 180°, 270°

Vector-/

TrueType fonts

Size of width and height 0.9 – 128 mm, variable zoom,

orientation 360° in steps of 1°

Font formats Bold, italic, underlined, outline, negative, gray, vertical,

depending on character fonts

Font width

Variable

Graphics

Graphic elements

Line, arrow, box, circle, ellipse, filled and filled with fading

Graphic formats

PCX, IMG, BMP, TIF, MAC, GIF, PNG

Barcodes

Linear barcodes Code 39, Code 93 EAN/UPC Appendix 5 JAN 8, 13

Code 39 Full ASCII FIM MSI

Code 128 A, B, C HIBC Plessey

Codabar Interleaved 2/5 Postnet

EAN 8, 13

Ident- and lead RSS 14

EAN/UCC 128 code of Deutsche UPC A, E, E0

EAN/UPC Appendix 2 Post AG

2D codes Aztec, Codablock F, Data Matrix, PDF 417, Micro PDF 417, UPS

Maxicode, QR-Code, RSS 14 truncated, limited, stacked and

stacked omnidirectional, EAN-Datamatrix, GS1 Data Bar

All codes variable in height, module width and ratio. Orientation

0°, 90°, 180°, 270°. Optionally with check digit, printed

characters and start/stop code, depending on code type.

Software

Programming

J-Script direct programming Standard

abc-Basic Compiler Standard

Database Connector Option

System diagnosis/

administration

Printer monitoring with Intra- and Internet Standard

Network Manager Option

Label software

cablabel R2

Standard

Direct programming with ZPL Standard

Codesoft, Nicelabel, Easylabel Option

Bartender, Label Matrix, Labelview Authorized distri-

bution by resellers

Windows driver

32/64 bit

certified for

Windows XP Server 2003

Windows Vista Server 2008  Standard

Windows 7 Server 2008 R2

Windows 8 Server 2012

Mac driver

OS X printer driver from version 10.6

Standard

Linux driver

CUPS-based

from version 1.2 Standard

Stand-alone

operation

 Standard

Ribbon

Ink

outside or inside

Roll diameter up to mm

Core diameter mm

25,4

Ribbon length variable up to m

360

Width mm

50 - 114

Printer dimensions

EOS1 EOS4

Height x Depth x Width mm

189 x 322 x 253 245 x 412 x 264

Weight kg

4 5

Label sensor

Gap sensor for leading edge of the label or

punching marks and end of material

Reflective sensor from the bottom

for black mark

Distance from the center to the left mm

0 - 58