Operator`s manual

cab Produkttechnik GmbH & Co KG
6
PRODUCT MARKING AND BARCODE IDENTIFICATION
6
Chapter 1 Introduction
Printer Specifications
Model e4/200 e4/300
Printing method Direct thermal & Thermal transfer
Printing resolution 203dpi (8dots/mm) 300dpi (11.8dots/mm)
Max printing speed 4ips (101.6mm/s) 3ips (76.2mm/s)
Max printing width 4.25” (108mm) 4.17? (106mm)
Max printing length 40" (1016mm)
Memory 2MB FLASH ROM, 4MB SDRAM
Media Roll-feed, die-cut, continuous, fan-fold, tags, tickets in plain
paper or thermal paper
Width 110mm max. 27mm min.
Supply roll: OD 6? (152mm) max., ID 1? (25.4mm) min.
Ribbon Wax, Wax/Resin, Resin
Ribbon roll: OD 3? (76.2mm) max., ID 1? (25.4mm) core
Max width: 110mm; Max length: 360M
Fonts Windows True Type Fonts (when using Windows drivers); Five
built-in ASCII fonts and a 24Á24 dot matrix Chinese font.
Bar Code Types* 1D Barcode : Code 39¬Code 93¬Code 128/subset A,B,C¬
Codabar¬ Interleave 2 of 5¬UPC A/E 2 and 5 add-on¬
EAN-13/8/128¬ UCC-128¬ Postnet¬ Plessey¬ HBIC¬ Telepen¬
FIM and so on»
2D Barcode : MaxiCode¬PDF417¬Data matrix and so on.
Media sensor Reflective
Interfaces RS-232 serial, Centronics (or USB)**
Power rating 24 VDC, 2.0A****
Weight 3.5kgs
Dimensions W256 x D329 x H200mm
Operation environment Temperature: 40°F–100°F (0°C – 40°C)
Relative humidity: 5% - 85% non condensing
Optional items Peeler kit, Internal 100/10M Ethernet Interface card
* Theoretically, the printer can print any type of barcode, as determined by the software you are using.
** Please verify your USB interface requirements before ordering.
**** Power for e4-series barcode label printer is provided via an external power adaptor.
Specifications for Power Adapter
Input AC 100~240V, 47~63HZ
Output DC 24V, 2.0 A
Environment 0°C ~ 40°C
Unpacking and Inspection
Inspect the shipping container(s) for possible shipping damage, if damage is discovered, notify the
shipping company to report the nature and extent of the damage.
Please check the items according to the Packing List. If there are any items missing, notify your
authorized reseller.