Operator`s manual

8 8
3 Getting Started
3.5 Positioning the Media Sensor
READY
RIBBON
MEDIA
PAUSE
FEED
CANCEL
100
100
80
60
40
40
60
80
21
1
3
4
1
3
4
1 Media sensor
2 Media sensor cover
3 Media
4 Spaces between labels
Release the printhead module and swing it up.
Take the cover (2) off the media sensor (1).
Position the media sensor (1) so that the relevant labels pass centrally over it, and the sensor can alternately detect
labels and the spaces between them.
See the two examples on the right of the illustration.
Replace the cover on the media sensor.
Close the printhead module by pressing it down until it locks in.
1.
2.
3.
4.
5.