Technical data

8
Label printers with centered material positioning
and drawing roller
Accessories
For single-sided printing
Printable materials accordant to A
+
M. The additional drive roller
next to the print head enables the material to be separated from
the ribbon and improves printing accuracy. Operation and control
are compatible with the A
+
series.
For double-sided printing
For simultaneous front and back printing, e.g. continuous
materials, cardboard and ready-for-use heat shrink tubes. The
additional drive roller next to the print head enables the material
to be separated from the ribbon and improves printing accuracy.
Operation and control are compatible with the A
+
series.
Stacker with cutter
Printed materials are cut and stacked.
The print job is stopped as soon as the
maximum stack height is reached. Even
stiff or curved materials may be processed.
We recommend to have your material
tested at our facilities.
Cutter
Used to cut paper labels, self-adhesive
labels, cardboard, textile or synthetic
materials as well as heat shrink tubes.
Perforation cutter
Enables the perforation of the material
for later manual separation.
Print rollers
for small and thin materials
Outside the material width the printhead
rubs against the print rollers. By using
small print rollers feeding errors and wear
on print head and print roller due to
rubbing are avoided. Three different
standard widths are available from stock.
1.7
Label printer A4
+
T
Printable resolution dpi 300 600
Print width up to mm 105.6 105.6
Print speed up to mm/s 125 100
1.8
Label printer XD4T
Printable resolution dpi 300
Print width up to mm 105.6
Print speed up to mm/s 125