Technical data

6
Label printers with centered material positioning
Accessories
For single-sided printing
As with the “classic” A
+
series all materials can be marked.
Especially very small and slim labels and continuous material on
rolls or reel. No adjustment of the print head for different widths of
material. Operation and control are compatible with the A
+
series.
1.5
Label printer A4
+
M
Printable resolution dpi 300 600
Print width up to mm 105.6 105.6
Print speed up to mm/s 125 100
For double-sided printing
For simultaneous front and back printing, e.g. continuous
materials, cardboard labels and ready-for-use heat shrink tubes.
No adjustment of the print head for different widths of material.
Operation and control are compatible with the A
+
series.
1.6
Label printer XD4
Printable resolution dpi 300
Print width up to mm 105.6
Print speed up to mm/s 125
Stacker with cutter
Printed materials are cut and stacked.
The print job is stopped as soon as the
maximum stack height is reached. Even
stiff or curved materials may be processed.
We recommend to have your material
tested at our facilities.
Cutter
Used to cut paper labels, self-adhesive
labels, cardboard, textile or synthetic
materials as well as heat shrink tubes.
Perforation cutter
Enables the perforation of the material
for later manual separation.
Print rollers
for small and thin materials
Outside the material width the printhead
rubs against the print rollers. By using
small print rollers feeding errors and wear
on print head and print roller due to
rubbing are avoided. Three different
standard widths are available from stock.