Technical data

21
9.4
9.5
9.6
9.7
Accessories - Applicator A1000
Tamps
Labels are applied on the tamp and held by vacuum. Tamp and label are
then moved to the product by applicator.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Universal tamp pads Tamp pad
A1021 70x60 A1021 90x90 A1021 WxH
Usage A2
+
A4
+
A4
+
A2
+
A4
+
A6
+
Label width mm 25-63 25-70 25-90 25-63 25-116 50 -176
Label height mm 25-60 25-90 25-200
Product surface Flat
Product height Variable
Product during
labeling
Not moving
Universal tamp pads Tamp pad
A1321 116x102 A1321 116x152 A1321 WxH
Usage A4
+
A4
+
A4
+
A6
+
Label width mm 25 -116 25 -116 25 -116 50 -176
Label height mm 25-102 25-152 25-200
Product surface Flat
Product height Variable
Product during
labeling
Not moving
Tamp spring-mounted
The spring deflection allows labeling even on inclined surfaces.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Blow pad
In case of pressure-sensitive products, the label can be blown on. Thus,
the blow pad moves to a fixed height. The product to be printed is
positioned about 10 mm below.
Roll-on pad
Using the roll-on pad the label is moved to below the roll. The pad moves
onto the product and the label is rolled on during transport.
Blow pad A2021
Usage A2
+
A4
+
A6
+
Label width mm 25-63 25-116 5 0-176
Label height mm 25 -10 0
Product surface Flat
Product height Fixed
Product during
labeling
Not moving or in motion
Roll-on pad A1411
Usage A4
+
A6
+
Label width mm 25-116 50-76
Label height mm 80-200 80-200
Product surface Flat
Product height Variable
Product during
labeling
In motion