Technical data

19
9.1
9.2
Accessories - for dispensing labels
For dispensing labels
Hand switch TR1
Printing and dispensing on demand
Foot switch
Printing and dispensing on demand
Interface connector/Sub-D plug
Sub-D plug 15-pin with screw clamps for PS5, PS6, PS7 and applicators. To connect
external control signals.
Product sensor
For automatic product detection on the conveyor belt
Testbox 2
Simulation of automatic operation
8.1
8.2
8.3
8.4
8.5
For peel-off adapter PS5,
present sensor PS6,
pause adapter PS7,
dispensing modules A5104/A5106,
applicator A1000,
applicator A3200
Dispensing module with peel-off adapter PS5
For labeling packages on a conveyor belt. The product sensor triggers
the printing process. Labeling is started and at the same time the next
label is printed. Conveyor speed and print speed need to be synchro-
nized.
All-around labeler
Combined with the A1000 applicator labels on cylindrical objects around
the entire circumference of 360° can be applied. The product is put on
the rolls and labeling is started via hand or foot switch.
All-around labeler
Usage A2
+
, A4
+
with applicator A1000-220
Product diameter mm 12-40
Product surface Cylindrical
Product during lab eling In rotary motion
Tamp pad A1021 WxH
Label width mm 25 -116
Label height mm 25 -140
A5104 A5106
Usage A4
+
A6
+
Label width mm 25 -116 50-176
Label height mm 25-200
Product surface Flat
Product height Fixed
Product during labeling
In motion
with speed synchronized to printer