Technical data

Accessories - dispensing labels

Dispensing printers (“P” types) additionally need to have a

peel-off adapter or present sensor. Different types for either

manual operation, or via hand switch, foot switch or an

external signal are available.

Dispensing labels

Peel-off adapter PS5 for automatic operation

Printing and dispensing the label is triggered via external signal. The label is removed by

an applicator or robot.

I/O interface Inputs: Outputs:

Start No print job

Label removed Printer not ready

External error Print job active

Label in dispensing position

Extended peel-off plate

For labels particularly difficult to remove from liner the peel-off plate with rewind guide

plate, extended by 10 mm, is used. Only in connection with present adapter PS5 or an

applicator.

Present sensor PS6

1. Manual operation

The present sensor detects the label being in dispensing position and interrupts the print

job. As soon as the label has been manually removed the next one is printed immediately.

2. Automatic operation

Dispensing via hand switch, foot switch, or an external signal

I/O interface Inputs: Outputs:

Start No print job

External error Printer not ready

Print job active

Label in dispensing position

Present sensor PS8 for manual operation

The present sensor detects the label being in dispensing position and interrupts the print

job. As soon as the label has been manually removed the next one is printed immediately.

Present sensor PS9 variable

For dispensing e.g. round labels where the leading edge of the label cannot be detected

by the PS8. Extension is customized.

7.1

7. 2

7. 3

7.4

7. 5