Technical data

16
5.1
5.3
5.5
5.2
5.4
Accessories - cutting labels, perforating labels, stacking labels
Cutter CU
Used to cut paper labels, self-adhesive labels, cardboard, textile or
synthetic materials as well as heat shrink tubes.
Cutter tray
Up to about 50 labels may be collected in the cutter tray.
Cutter CU2 CU4 CU6 CU8
Usage A2
+
A4
+
A4
+
M, A4
+
T
XD4, X D 4 T, XC 4
A6
+
XC6
A8
+
Material width up to mm 67 120 110 180 232
Material weight cardboard gr/m
2
60-500
Material thickness mm 0.05-0.8
Cutting length mm >5
Gap height up to mm 2.5
Cuts/min. 130 120 110 100
Stop print job When final position of cutter is not reached
Cutter tray 4 for A4
+
, A4
+
M
Label height up to mm 100
Perforation cutter PCU4
Enables the perforation of the material for later manual separation.
Perforation cutter PCU4
Usage A4
+
, A4
+
M, A4
+
T, XD4, XD4T, XC4
Material width up to mm 85
Material weight cardbaord gr/m
2
60-300
Material thickness mm 0.05-0.8
Cutting length mm >5
Gap height up to mm 4.5
Cuts/min. Cutting 120/perforating 150
Stop print job When final position of cutter is not reached
Perforating: Web width mm 0.5
Web distances mm 2.5 or 10
Stacker with cutter ST4
Printed materials are cut and stacked. The print job is stopped as soon
as the maximum stack height is reached. Even stiff or curved materials
may be processed to some extent. We recommend to have your
material tested at our facilities.
Stacker with cutter ST4/L ST4/M
Usage A4
+
, XC4 A4
+
M, A4
+
T, XD4, XD4T
Material width up to mm 20-110 20-10 0
Material weight cardboard gr/m
2
60-300
Material thickness mm 0.05-0.8
Cutting length mm 20-150
Gap height up to mm 1.2
Cuts/min. 120
Stop print job
When final position of cutter is not reached,
when cover open, when stack height reached
Stack height up to mm 100
Base frame A4
+
Used to place the devices on the table in any position.
Storage table label WxH
Storage table and protective cover are adapted to the label
size and need to be ordered separately.