Technical data

12
Label printers - technical data
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10
Label printer A2
+
A4
+
A6
+
A8
+
A4
+
M XD4 A4
+
T XD4T XC4 XC6
Print head
Printing method thermal transfer
               
thermal direct

–
 
–
   
– – – – – – –
Printable resolution dpi 300 600 203 300 600 203 300 300 300 600 300 300 600 300 300 300
Print speed up to mm/s 150 100 250 250 100 200 200 150 125 100 125 125 100 125 125 125
Print width up to mm 54.2 57 104 105.6 105.6 168 162.6 216 105.6 105.6 105.6 105.6 105.6 105.6 105.6 162.6
Material Paper, cardboard, textile, plastics
Labels or continuous materials
on rolls or fanfold
       

1)

1)
Labels on reel – – – –
   
– –
Material thickness mm/weight g/m
2
0.05-0.8/60-300 0.05-0.2/60-180
Width labels
2)
mm 4-63 20-116 46-176 46-220 4-106 10-110 4-106 10-110 20 -116 46 -176
liner mm 24-67 24-120 50 -180 50-235 10-110 10-110 10-110 10-110 24-120 50-180
continuous material mm 24-67 24-120 50 -180 50-235 4-110 4-110 4 -110 4-110
– –
contin. heat shrink tube mm 10-67 25-85
– –
4-85 4-85
– – – –
Label without back-feed from mm 4 4 6 10 5 20 5 20 20 20
height
2)
when dispensing from mm 12 12 25 – – – – –
– –
up to mm 5,000 2,000 5,000 4,000 1,000 4,000 3,000 2,000 4,000 1,000 2,000 4,000 1,000 2,000 2,000 1,500
Media roll outer diam. up to mm 205 205 205 205 205 300 205 300 300 300
core diameter mm 3 8 -10 0 38 -10 0 38-100 38-10 0 38-100 38-100 38 -10 0 38-10 0 76 76
winding Outer or inner
Ribbon
Ink side Outer or inner
Roll diameter up to mm 80 80 80 72 80 72 80 72 72 72
Core diameter mm 25 25 25 25 25 25 25 25 25 25
Variable length up to m 500 500 500 360 500 360 500 360 360 360
Width
3)
up to mm 57 114 165 220 114 114 114 114 114 165
Internal rewinder (only with peel-off devices)
Outer diameter up to mm 142 142 142 – – – – – – –
Core diameter mm 3 8.1 38.1 38 .1 – – – – – – –
Label winding Outer only Outer only Outer only – – – – – – –
Dimensions and weights
Height mm 274 274 274 274 274 395 274 395 395 395
Depth mm 446 446 446 446 446 554 446 554 554 554
Width mm 190 242 302 352 242 248 242 248 248 358
Weight kg 8.5 9 13 15 9 21 9 21 22 24
Label sensor
Gap sensor For leading edge or punch marks and end of material
Reflective sensor f rom bottom/opt. top For print marks
Distance to locating edge mm 5-26 5-53 5-53 5-53 – – – – 5-53 5-53
center to the left mm – – – – 0-53 0-53 0-53 0-53 – –
Electronics
Processor 32 bit clock rate MHz 266
Main storage (RAM) MB 64
IFFS printer memory MB Flash 8
Plug-in CompactFlash Type I

WLAN card

Battery buffer for real-time clock

Acoustic error signal 
Interfaces
Centronics according to IEEE 1284

–
RS232 C

–
USB 2.0 hi-speed slave for PC
 
Ethernet 10/100 Base T, LPD-, RawIP-,
FTP-Printing, DHCP, HTTP, SMTP,
SNMP, TIME, Zeroconf, mDNS, SOAP
 
RS422/RS485

–
Peripheral connection
 
WLAN 802.11b/g, WEP/WPA-PSK (TKIP)
 
2 xUSB hosts for external operation panel,
keyboard, scanner, service key, USB stick
 
Operating data
Power supply 100-240 VAC ~ 50/60 Hz, PFC
Power consumption W 100-300 depending on type of printer
Temperature/humidity operation 5-40 °C/10-85 % not condensing
storage 0-60 °C/20-80 % not condensing
transport –25-60 °C/20-80 % not condensing
Approvals CE, FCC class A, CB, CCC, UL
1)
Continuous materials on rolls only after being tested.
2)
Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved.
3)
Ribbon according to label width in order to avoid folding.
 Standard  Optionally