Technical data

11
1
2
3
4
5
6
7
8
1
2
Common details
Solid metal housing
Die-cast aluminum. All components are mounted on it.
Roll holder
For labels up to 300 mm diameter. Swing lever and
integrated brake make sure that the labels are unwound
with constant tension.
Ribbon saver for print head 1
The ribbon saver is used for labels to be partially printed.
The print head is lifted within the unprinted area and the
ribbon stopped during label feeding.
Fanfold guide
Fanfolded labels are positioned behind the print unit. Guide
and additional brake ensure reliable feeding to the print unit.
Wide graphic display
White backlight for optimum readability.
Ribbon holder
Simple, centered insertion of the ribbon with
three-part tightening axles.
Simple adjustment
The print head is pressed down by toggles. One is
mounted to the left label margin, the other is pushed to
the right label margin.
Peripheral connection
All add-on modules are easy to connect. All peripheral
devices are plugged in the printer using two pins and are
fixed in place with a screw.
1
2
3
4
5
6
7
8
Pictured:
Label printer XC6
for two-color printing