Technical data

Label printers for two-color printing

Accessories

Two in-line arranged thermal transfer print units for

simultaneous two-color printing in one label. With ribbon

saver at one print unit:

• The XC series meets the conditions for the classification

and labeling inventory according to GHS.

• For large label rolls up to 300 mm diameter

• The two print units including ribbon holder, operation panel

and electronics are adopted from the proven A

series.

We are glad to assist you in the selection of proper ribbons.

Stacker with cutter

For XC4 printers only. Printed materials

are cut and stacked. The print job is

stopped as soon as the maximum stack

height is reached. Even stiff or curved

materials may be processed. We re-

commend to have your material tested

at our facilities.

Cutter

Used to cut paper labels, self-adhesive

labels, cardboard, textile or synthetic

materials as well as heat shrink tubes.

Perforation cutter

For XC4 printers only. Enables the perforation

of the material for later manual separation.

1.9

Label printer XC4

Printable resolution dpi 300

Print width up to mm 105.6

Print speed up to mm/s 125

1.10

Label printer XC6

Printable resolution dpi 300

Print width up to mm 162.6

Print speed up to mm/s 125