Operator`s manual
Table Of Contents
- Operator's Manual A3-2/A3/A4/A6
- Copyright
- Table of Contents
- Trademarks
- A General Guide to the Documentation
- 1. Product Description
- 2. General Safety Instructions
- 3. Unpacking
- 4. Printer Component Location
- 5. Connecting the Printer
- 6. Control Panel
- 7. Media Loading
- 8. Printer Configuration
- 9. Test Options
- 10. Memory Cards
- 11. External Keyboard
- Appendix A - Operation in Peel-off Mode
- Appendix B - Pin Assignment of the Interface Connectors
- Appendix C - Error Messages / Problem Solution
- Appendix D - Maintenance / Cleaning
- Appendix E - Replacing Assembly Units
- Appendix F - Firmware Updates
- Index
- EU - Conformity Declaration
81cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6 9. Test Options
The meaning of the details printed on the device list are as follows:
CPU : Type and serial number of the CPU
Revision number of the CPU and FPGA
TPH : Resolution and number of dots
of the printhead installed
CARD* : Capacity, manufacturer, serial number and
version number of the FlashCard installed
SLOT* : Type, serial number and revision number of the
interface expansion card installed.
USB [a]* : Type and revision number of the USB devices installed
[b/c]Speed a : identifying number of the USB device
b : identifying number of the USB device, which is
connected to device a
c : identifying number of the device b port, which is
connected to device a
Speed : Low- or High-Speed-USB-device
* Will only be printed if the respective devices are installed.