Operator`s manual
Table Of Contents
- Operator's Manual A3-2/A3/A4/A6
- Copyright
- Table of Contents
- Trademarks
- A General Guide to the Documentation
- 1. Product Description
- 2. General Safety Instructions
- 3. Unpacking
- 4. Printer Component Location
- 5. Connecting the Printer
- 6. Control Panel
- 7. Media Loading
- 8. Printer Configuration
- 9. Test Options
- 10. Memory Cards
- 11. External Keyboard
- Appendix A - Operation in Peel-off Mode
- Appendix B - Pin Assignment of the Interface Connectors
- Appendix C - Error Messages / Problem Solution
- Appendix D - Maintenance / Cleaning
- Appendix E - Replacing Assembly Units
- Appendix F - Firmware Updates
- Index
- EU - Conformity Declaration
B-2 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Interface Cable for RS-232
To communicate with the printer, a standard RS-232 interface cable is used.
If you have any problems interfacing with the printer, contact the manufacturer
of your computer on the pin assignments of the interface. Use the pin
assignment of the printer as shown in Table B-1 to obtain a compatible cable.
9 pin connector 9 pin plug
Fig. B-2 Interface Cable with 9 pin Connector
11
22
33
44
55
66
77
88
99
PC Printer
Appendix B - Pin Assignment of the Interface Connectors