Technical data

cab | 9
1
Accessories for dispensing devices.
Printing and dispensing on demand
A hand or foot switch can be connected to the PS6 present
sensor to start print jobs.
Hand switch
Starts printing and dispensing.
Foot switch
Starts printing and dispensing.
Sub D plug
for PS5, PS6 and PS7
To connect external control signals for auto-
matic operation. Sub D plug 15-pin with
screw clamps.
External panel
If the panel is no longer accessible, e.g. after
installation within a facility, an external panel
can be installed. There are additional slots
for a CF memory card Type I and a USB
master interface.
1
Present sensor or pause adapter
An additional present sensor or peel-off adapter is needed to
dispense labels. cab offers devices for both manual and
automatic operation.
Extended peelbar
(only for PS5 present adapter).
If labels are difficult to remove from the liner, a peel-off plate with
rewind guide plate, extended by 10 mm, is used.
PS8 present sensor for manual operation
The sensor detects that the label is in dispensing
position and pauses the print process. Once the
label has been removed manually, the next one is
printed automatically.
PS5 present adapter for automatic operation
Printing and dispensing of the label is triggered by
an external signal. The label is removed by a robot
or an applicator.
Inputs: Start, label removed, external error
Outputs: No print job, printer not ready, print started,
label in dispensing position.
PS6 present sensor
for manual or automatic operation
1. As with PS8, once the label has been removed,
the next one is printed automatically.
2. Dispensing on demand with hand or foot switch
or an external signal (as with PS5).
PS9 extended present sensor
for manual operation
For dispensing labels whose front edge is not
detected by the PS8 present sensor. The extension
can be customized
PS7 pause adapter for basic
and dispensing devices
The print job is stopped by the pause signal.
The label being printed is finished first, e.g. by using
a label loop.
Inputs: Pause, external error
Outputs: No print job,
printer not ready,
print job active