Technical data

cab | 12
1
2
3
4
5
Printer holder for A4
+
and A6
+
, A2
+
on request
Stand
Total height mm 1,600
Height of appliance mm 1,400
Projection until middle
of label mm
230 – 500
Chassis
Width x Depth x Height mm
600 x 860 x 140
1
Base frame
The base frame is customized accord-
ing to the width and height require-
ments. The labeling system is fixed in
place with two pins. The exact position
can be adjusted on the crossbar.
2
Roll-on application
For labeling round products with diam-
eters 12 up to 40 mm. The product is
pushed onto the rolls. The labeling pro-
cess is started by pressing the hand or
foot switch.
3
Dispensing module for roll-on
application
For labeling packaging on the conveyor
belt. The conveyor speed must be
synchronized with the print speed. It is
suitable for labels with a width up to
116 mm and a length up to 200 mm.
Further technical details can be
provided on request.
4
Stand
+
The stand enables the printer to be in-
tegrated quickly and flexibly into any
manufacturing line. The height and
width of the labeling position can be
adjusted with ease. Four guide rollers
on the chassis ensure mobility. The
stand is adjusted at the place of instal-
lation using adjustable feet.
5
Accessories for applicators.