Technical data

5
1
2
3
4
5
6
7
8
Common details
Label printer A4
+
with dispensing function
Compact cover Metal cover
The 2-part cover made of impact-resistant ABS plastic
folds up when opened.
On request, the A4
+
and A6
+
transfer printers are also
available with a metal cover. (as standard for the A8
+
).
1.11
White graphic display
With backlight for optimum readability.
Ribbon holder
Three-part tightening axles enable quick and easy ribbon
exchange.
Straightforward adjustment
The printhead is pressed down with two sliding toggles.
One is mounted to the left label margin, the other is pushed
to the right label margin.
Peripheral connection
Add-on modules such as cutters, external rewinders, present
sensors and applicators are easy to connect via the USB
peripheral interface. All peripherals are connected to the
printer in seconds using two pins and fixed in place with a
screw.
1
2
3
4
6
5
7
8
Solid metal housing
Made of die-cast aluminum. All components are mounted
on it.
Roll holder
Available for core diameters from 38 mm. (We provide
adapters for core diameters wider than 76 mm for improved
label winding). The spring-mounted margin stop ensures
constant tension during feeding, thus ensuring a highly
precise imprint.
Internal rewinder
The three-part tightening axles ensure the easy rewinding
and removing of labels or liners with or without paper core.
Peel-off option
The label is removed from its liner via a peel-off plate. A high
printing and dispensing accuracy can be achieved with the
additionally powered rewind assist roller and the pinch roller.