Technical data

23
10.1
10.2
10.3
10.5
10.4
10.5
Accessories - mounting equipment
1
2
Printer holder
3
Mounting foot (for A2
+
, A4
+
)
For fastening the print and apply system and product holder.
Mounting plate
The print and apply system is fastened on the mounting plate.
Profile
Standard lengths are 40, 80, 120 mm.
The aluminum square profile can also be manufactured in
other lengths upon request.
Base plate
For fastening the product holder
Standard size: 500 x 255 mm.
Printer holder
The A2
+
, A4
+
or A6
+
label printers are
fixed on the plate and quicklocked.
Floor stand 1600
Total height mm 1600
Labeling height up to mm 1400
Projection until middle of label mm 230 - 500
Chassis: Width x depth x height mm 600 x 860 x 140
Floor stand
The floor stand enables the printer to be quickly and flexibly
integrated into any manufacturing line. Height and width of the
labeling position are easy to adjust. Four guide rollers at the
chassis provide for mobility. The floor stand is adjusted with
adjustable feet at the place of destination.