Technical data

21
9.4
9.5
9.6
9.7
Accessories - Applicator A1000
Tamps
Labels are applied on the tamp and held by vacuum. The applicator
then moves the tamp with label to the product.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Universal tamp pad Tamp pad
A1021 / 70 x 60 A1021 / 90 x 90 A1021 / W x H
Application A2
+
A4
+
A4
+
A2
+
A4
+
A6
+
Label width mm 25 - 63 25 - 70 25 - 90 25 - 63 25 -116 50 -176
Label height mm 25 - 60 25 - 90 25 - 200
Product surface flat
Product height variable
Product during labeling not moving
Universal tamp pad Tamp pad
A1321 / 116 x 102 A1321 / 116 x 152 A1321 / W x H
Application A4
+
A4
+
A4
+
A6
+
Label width mm 25 - 116 25 - 116 25 - 116 50 - 176
Label height mm 25 - 102 25 - 152 25 - 200
Product surface flat
Product height variable
Product during labeling not moving
Tamp spring-mounted
The spring deflection allows labeling even on inclined surfaces.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Blow pad
The label can be blown on in case of pressure-sensitive products. The
blow pad moves to a fixed heigth. The product to be printed is positioned
about 10 mm below.
Roll-on pad
Using the roll-on pad the label is moved to below the roll. The pad moves
onto the product and the label is rolled on during transport.
Blow pad A2021
Application A2
+
A4
+
A6
+
Label width mm 25 - 63 25 - 116 50 - 176
Label height mm 25 - 100
Product surface flat
Product height fixed
Product during labeling not moving or moving
Roll-on pad A1411
Application A4
+
A6
+
Label width mm 25 - 116 50 - 176
Label height mm 80 - 200 80 - 200
Product surface flat
Product height variable
Product during labeling moving