Technical data

19
9.1
9.2
Accessories - dispensing labels
Product
Hand switch TR1
Printing and dispensing on demand.
Foot switch
Printing and dispensing on demand.
Sub D plug
Sub D plug 15 pin with screw clamps for PS5, PS6, PS7 and Applicators.
To connect external control signals.
Product sensor
For automatic product detection on the conveyor belt.
Testbox 2
Simulation of automatic operation.
8.1
8.2
8.3
8.4
8.5
for Present adapter PS5
Present sensor PS6
Pause adapter PS7
Dispensing module 5100A
Applicator A1000
Applicator A3200
Dispensing module with dispensing adapter PS5
To apply labels on packaging on a conveyor belt.
The product sensor triggers the printing process.
Labeling is started and at the same time the next label is printed.
Conveyor speed and print speed need to be synchronized.
All-round print and apply system
Together with the A1000 applicator the all-round print and apply system
enables to apply labels on cylindrical objects around the entire
circumference of 360°. The product is put on the rolls and labeling is
started via hand or foot switch.
All-round labeler
Application A2
+
, A4
+
with applicator A1000-220
Product diameter mm 12 - 40
Product surface cylindrical
Product during labeling in rotary motion
Tamp pad A1021 / WxH
Label width mm 25 - 116
Label height mm 25 - 140
A5104 A5106
Application A4
+
A6
+
Label width mm 25 - 116 50 - 176
Label height mm 25 - 200
Product surface flat
Product height fixed
Product during labeling in motion with synchronized speed to printer