Technical data

16
5.1
5.3
5.5
5.2
5.4
Accessories - cutting, perforating, stacking labels
Cutter CU
The cutter is used to cut paper, self-adhesive labels, cardboard, textiles
or plastics and heat shrink tubes.
Cutter tray
Up to about 50 labels may be collected in the cutter tray.
Cutter CU2 CU4 CU6 CU8
Used for printer model A2
+
A4
+
A4
+
M, A4
+
T
XD4, XD4T, XC4
A6
+
XC6
A8
+
Material width up to mm 67 120 110 180 232
Material weight cardboard gr/m
2
60 - 500
Material thickness mm 0,05 - 0,8
Cutting length mm > 5
Gap height up to mm 2,5
Cuts / min. 130 120 110 100
Stop print job, if Final position of cutter not reached
Cutter tray 4 for A4
+
/ A4
+
M
Label height up to mm 100
Perforation cutter and cutter PCU4
The perforation cutter enables additionally perforating the material for
manual separation later on.
Perforation cutter and cutter PCU4
Used for printer model A4
+
, A4
+
M, A4
+
T, XD4, XD4T, XC4
Material width up to mm 85
Material weight cardbaord gr/m
2
60 - 300
Material thickness mm 0,05 - 0,8
Cutting length mm > 5
Gap height up to mm 4,5
Cuts / min. Cutting 120 / Perforating 150
Stop print job, if Final position of cutter not reached
Perforating: Web width mm 0,5
Web distances mm 2,5 or 10
Stacker with cutter ST4
The printed materials are cut and stacked. The print job is stopped as
soon as the maximum pile height is reached. Even stiff or curved
materials may be processed to some extent.
We recommend to do the material testings at our facilities.
Stacker with cutter ST4 / L ST4 / M
Used for printer model A4
+
, XC4 A4
+
M, A4
+
T, XD4, XD4T
Material width up to mm 20 - 110 20 - 100
Material weight cardboard gr/m
2
60 - 300
Material thickness mm 0,05 - 0,8
Cutting length mm 20 - 150
Gap height up to mm 1,2
Cuts / min. 120
Stop print job, if
Final position of cutter not reached,
cover open, stack height reached
Pile height up to mm 100
Base frame A4
+
The base frame is used to place the devices on the table
in any position.
Storage table label W x H
Storage table and protective cover are adapted to the label
size and need to be ordered separately.