Technical data

15
Extras Product
Metal cover
On request, the label printers A4
+
and A6
+
are available with metal cover. (supplied with A8
+
as standard).
Print roller DR4-M25
For small and thin materials up to a width of 25 mm.
Print roller DR4-M50
For very thin materials from a width of 20 up to 50 mm.
Print roller DR4-M80
For very thin materials up to a width of 80 mm.
Reflective label sensor
from top
Adapter 100 mm Ø
To keep the bending to a minimum during stacking it is recommended to use a
large core diameter.
Memory Card
CompactFlash Type I
Standard keyboard USB
Connection: USB, number of keys: 115
External operation panel
If the operation panel is not accessible, e.g. after installation within a facility,
an external panel can be installed. Additional slots are available for a CF memory card
Type 1 and a host interface.
Pause adapter PS7
For printing in a label loop. The print job is stopped by the pause signal.
The label being printed is finished first.
I/O Interface: Inputs: Outputs: no print job
Pause, external error printer not ready, print job active
Tester CC for linear and 2D barcodes
The camera tests readability or contents of the horizontally and vertically printed barcodes
directly after printing. If the code is faulty the print job is stopped and the label is removed.
The Tester CC can be used together with the tear-off mode, dispensing mode or with the
external rewinder. Please refer to the Operation Manual for further details.
Interfaces Product
Centronics Interface
bi-directional acc. to IEEE 1284
Interface RS422/RS485
1.200 up to 230.400 Baud/8 Bit
Label selection box – I/O box
From a higher-level control, like a PLC, up to 16 different labels can be selected from the
memory card. The I/O box enables via abc programming to realize easy programming of
the PLC with the 4 in- and outputs.
WLAN card 802.11 b/g
Connecting cable
Connecting cable RS232 C 9/9 pin, length 3 m
Patch cable CAT5e, 3 m, gray
Accessories-special equipment, interfaces, connecting cables
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.1
3.2
3.3
3.4
4.1
4.2