Technical data

12
Technical data
1)
Limitations may apply to small labels, thin materials or strong adhesives. Critical applications need to be tested and approved.
2)
The ribbon should roughly be the same width as the label in order to avoid folding.
 Standard  Option
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10
Label printer A2
+
A4
+
A6
+
A8
+
A4
+
M XD4 A4
+
T XD4T XC4 XC6
Print head
Print method Thermal transfer
              
Thermal direct

–
 
–
   
– – – – – –
Print resolution dpi 300 600 203 300 600 203 300 300 300 600 300 300 300 300 300
Print speed up to mm / s 150 100 250 250 100 200 200 150 125 100 125 125 125 125 125
Print width mm 54,2 57 104 105,6 105,6 168 162,6 216 105,6 105,6 105,6 105,6 105,6 105,6 162,6
Material
Labels, continuous rolls or fanfolded Paper, cardboard, textile, plastics such as PET, PE, PP, PI, PVC, PU, acrylate
Material thickness mm / weight g / m
2
0,05 - 0,8 / 60 - 300 0,05 - 0,2 / 60 - 180
Width labels
1)
mm 4 - 63 20 - 116 46 - 176 46-220 4 - 106 – 4 -106 – 20-116 46 -176
continuous material / liner mm 25 - 67 24 - 120 50 - 180 50-235 10 - 110 –
continuous shrink tube mm 10 - 67 25 - 85
– –
4 - 85 4 - 85
– –
Height
1)
without back-feed from mm 4 4 4 4 4 6 6 10 5 5 20 5 20 20
when dispensing
1)
from mm 12 12 12 12 12 25 25 – – – – – –
up to mm 5000 2000 5000 4000 1000 4000 3000 2000 4000 1000 2000 4000 2000 2000 1500
Media roll Outside diameter up to mm 205 205 205 300 205 300 300
Core diameter mm 38 - 100 76
Winding Outside or inside
Ribbon
Ink Outside or inside
Roll diameter up to mm 80 72 80 72 80 72 72
Core diameter mm 25 25 25 25 25 25 25
Ribbon length variable up to m 500 360 500 360 500 360 360
Width
2)
up to mm 57 114 165 220 114 114 114 114 114 165
Internal rewinder (only for peel-off version)
Outside diameter up to mm 142 –
Core diameter mm 38,1 –
Winding Only outside –
Dimensions Printer
Height mm 274 395 274 395 395
Depth mm 446 554 446 554 554
Width mm 190 242 302 352 242 248 242 248 248 358
Weight kg 8,5 9 13 15 9 21 9 21 22 24
Label sensor
Gap sensor For leading edge or punch marks and end of material
Reflective sensor from the bottom / optional from the top For print marks
Distance to locating edge mm 5 - 26 5 - 53 5 - 53 – – 5 - 53
Distance from center to the left mm – – – 0 - 53 –
Electronics
Processor 32 Bit clock rate MHz 266
RAM MB 64
Memory IFFS MB Flash 8
Slot for CompactFlash Type I memory card

Slot for Wireless LAN card  
Battery buffer for real-time clock, printout of time and date, data storage on shut-down  
Warning signal: acoustic signal in case of error 
Interfaces
Centronics bi-directional acc. to IEEE 1284


–
RS232 C 1.200 up to 230.400 Baud / 8 Bit


–
USB 2.0 High Speed Slave for PC connection 


Ethernet 10 / 100 Base T, LPD, RawIP-
printing, ftp printing, DHCP, HTTP, FTP,
SMTP, SNMP, TIME, Zeroconf, mDNS,
SOAP



RS422, RS485 1.200 up to 230.400 Baud / 8 Bit  –
Peripheral connection



WLAN Card 802.11b/g WEP/WPA PSK (TKIP)

2 x USB master for external operation panel, keyboard, scanner, service key, USB flash drive 

Operating data
Power supply 100 - 240 V ~ 50 / 60 Hz, PFC
Power consumption 100 - 300 W depending on type of printer
Temperature / humidity Operation: + 5 - 40°C / 10 - 85% not condensing
 Stock: + 0 - 60°C / 20 - 85% not condensing
 Transport: – 25 - 60°C / 20 - 85% not condensing
Approvals CE, FCC class A, CB, CCC, UL