Technical data

11
1
2
3
4
5
6
7
8
1
2
Common details
Solid metal housing
Made of die-cast aluminum. All components are mounted
on it.
Roll holder
For labels up to a diameter of 300 mm.
Swing lever and integrated brake make sure that the labels
are unwound with constant tension.
Ribbon saver for printhead 1
The ribbon saver is used for labels to be partially printed.
The printhead is lifted within the unprinted area and the
ribbon stopped during label feeding.
Fanfold guide
Fanfolded labels are positioned behind the print unit.
Guide and additional brake ensure a reliable feeding to the
print unit.
Big graphic display
White backlight for optimum readability.
Ribbon holder
Simple and centered insertion of the ribbon with the three-
part tightening axles. The imprinted rule on spindle
simplifies ribbon positioning.
Straightforward adjustment
The printhead is pressed down with sliding toggles. One
is mounted to the left label margin, the other is pushed to
the right label margin.
Peripheral connection
Add-on modules are easy to connect. All peripherals are
connected to the printer in seconds using two pins and
fixed in place with a screw.
1
2
3
4
5
6
7
8