Technical data

10
The special ones for two-color printing
Accessories
1.9
Label printer XC4
Print resolution dpi 300
Print width up to mm 105,6
Print speed up to mm/s 125
For two-color printing
• Two in-line arranged thermal transfer print units for simultaneous
two-color printing in one label
• Ribbon saver at one print unit
• The XC-series meets the conditions for the Classification and
Labeling Inventory according to GHS
• For large label rolls up to a diameter of 300 mm
• The two print units with ribbon holder, operation panel and
electronics are adopted from the proven A
+
series
1.10
Label printer XC6
Print resolution dpi 300
Print width up to mm 162,6
Print speed up to mm/s 125
We are glad to assist you in the optimum selection of transfer
ribbons for the label material.
Stacker with cutter
(only for XC4). The printed materials are
cut and stacked. The print job is stopped
as soon as the maximum stack height is
reached. Even stiff or curved materials
may be processed to some extent.
We recommend to do the material
testings at our facilities.
Cutter
Used to cut paper, self-adhesive labels,
cardboard, textile or synthetic materials
and heat shrink tubes.
Perforation and cutter
(only for XC4). Used to enable the
perforation of the material for manual
separation.