Edition 9.1 - and X-Series Label Printers Made in Germany.
CONTENTS Overview types of industrial printers A+ series . . . . . . . 4 - 5 For special demands . . . . . . . . . . . . . . . . 6 - 7 For textile materials. . . . . . . . . . . . . . . . 8 - 9 The special ones for two-color printing. . . . . . . . . 10 - 11 Technical data . . . . . . . . . . . . . . . .
Printers for industrial demands Our professional printers are used in a wide variety of applications. During development, we focused first and foremost on simple and convenient operation coupled with high reliability. The printing units and housings are made of high-quality materials and are perfectly matched in terms of their form and function. Extensive peripherals and software enable customized solutions – any time.
Overview types of industrial printers A+ series The Sleek For small labels with high printing accuracy. 1.1 Label printer Print resolution dpi Print width up to mm Print speed up to mm/s A2+ 300 54,2 150 600 57 100 The Universal Our top-seller with high printing accuracy and an extensive range of accessories. A4.3+ preferably for thermal direct printing. 1.2 Label printer Print resolution dpi Print width up to mm Print speed up to mm/s A4+ A4.
Common details 1 2 3 6 7 8 4 5 1 White graphic display With backlight for optimum readability. 2 Ribbon holder Three-part tightening axles enable quick and easy ribbon exchange. 3 Straightforward adjustment The printhead is pressed down with two sliding toggles. One is mounted to the left label margin, the other is pushed to the right label margin.
For special demands With centered material guide Preferred for small and thick endless materials like flattened tubes, tapes or very small labels. • No adjustment of the printhead for different widths of material • Printing on very small or very thick continuous materials • Print speed for difficult to print materials is reducible • Operation and control are compatible with the A+ series 1.
Common details 2 7 1 Label printer A4+M with centered material guide 3 4 5 6 Label printer XD4 for double-sided printing 1 Big graphic display White backlight for optimum readability. 2 Ribbon holder Simple and centered insertion of the ribbon with the three-part tightening axles. The imprinted rule on spindle simplifies ribbon positioning. 3 No printhead adjustment The printhead is pressed down with two sliding toggles.
For textile materials Single-sided printing Particularly suitable for textile materials. The additionally installed drive roller after the printhead enables the textile material to be reliably separated from the transfer ribbon. • No adjustment of the printhead for different widths of material • Print speed for difficult to print materials is reducible • Operation and control are compatible with the A+ series 1.
Common details 2 7 1 Label printer A4+T with centered material guide 3 4 5 6 Label printer XD4T for double-sided printing 1 Big graphic display White backlight for optimum readability. 2 Ribbon holder Simple and centered insertion of the ribbon with the three-part tightening axles. The imprinted rule on spindle simplifies ribbon positioning. 3 No printhead adjustment The printhead is pressed down with two sliding toggles.
The special ones for two-color printing For two-color printing • Two in-line arranged thermal transfer print units for simultaneous two-color printing in one label • Ribbon saver at one print unit • The XC-series meets the conditions for the Classification and Labeling Inventory according to GHS • For large label rolls up to a diameter of 300 mm • The two print units with ribbon holder, operation panel and electronics are adopted from the proven A+ series 1.
Common details 1 2 6 3 2 1 4 7 8 5 1 Big graphic display White backlight for optimum readability. 2 Ribbon holder Simple and centered insertion of the ribbon with the threepart tightening axles. The imprinted rule on spindle simplifies ribbon positioning. 3 4 Straightforward adjustment The printhead is pressed down with sliding toggles. One is mounted to the left label margin, the other is pushed to the right label margin. Peripheral connection Add-on modules are easy to connect.
Technical data Standard Option 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.
Standard Operation panel Buttons/LED Pause, Feed, Cancel, Menu, Enter, 4 x Cursor display LCD graphic display Width 60, Height 40 mm, Text 4 lines, approx.
Accessories - overview Typical Possible Standard Option Extras 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.1 3.2 3.3 3.4 4.1 4.2 5.1 5.2 5.3 5.4 5.4 5.5 Metal cover Print roller DR4M-25, 50, 80 Reflective label sensor from the top Adapter 100 mm Ø Memory card Standard keyboard USB External operation panel Pause adapter PS7 - interrupt print job Tester CC for linear and 2D barcodes Interfaces Centronics Interface RS422 / RS485 Interface Label selection – I/O box WLAN card 802.
Accessories-special equipment, interfaces, connecting cables Extras 2.1 Product Metal cover On request, the label printers A4+ and A6+ are available with metal cover. (supplied with A8+ as standard). 2.2 Print roller DR4-M25 For small and thin materials up to a width of 25 mm. Print roller DR4-M50 For very thin materials from a width of 20 up to 50 mm. Print roller DR4-M80 For very thin materials up to a width of 80 mm. 2.3 Reflective label sensor from top 2.
Accessories - cutting, perforating, stacking labels 5.1 5.2 5.3 Cutter CU The cutter is used to cut paper, self-adhesive labels, cardboard, textiles or plastics and heat shrink tubes. Cutter tray Up to about 50 labels may be collected in the cutter tray. Cutter CU2 Used for printer model A2+ Material width up to mm Material weight cardboard gr/m2 Material thickness mm Cutting length mm Gap height up to mm Cuts / min.
Accessories - rewinding, unwinding labels 6.1 Rewind guide plate RG for internal rewinding Internal rewinding is done by using the dispensing printer. In this case, the peel-off plate is replaced by the rewind guide plate. Rewind guide plate Application Material width up to mm 6.2 RG4 A4+ dispensing version 120 External rewinder ER1/2/3 for direct printer connection The rewinder is directly screwed onto the printer. Labels are optionally wound either inside or outside.
Accessories - dispensing labels 1 1 Label printers (Type „P“) for dispensing labels additionally need to have a present adapter or a present sensor. Different types for either manual operation, or on demand with hand switch, foot switch or an external signal are available. Product 7.1 7.2 7.3 Present adapter PS5 on demand Printing and dispensing the label is triggered via external signal. The label is removed by an applicator or robot.
Accessories - dispensing labels for Present adapter PS5 Present sensor PS6 Pause adapter PS7 Dispensing module 5100A Applicator A1000 Applicator A3200 Product 8.1 8.2 8.3 8.4 8.5 9.1 and switch TR1 H Printing and dispensing on demand. Foot switch Printing and dispensing on demand. Sub D plug Sub D plug 15 pin with screw clamps for PS5, PS6, PS7 and Applicators. To connect external control signals. Product sensor For automatic product detection on the conveyor belt.
Applicator A1000 Real-time application Together with the A2+, A4+ and A6+ printers the A1000 applicator means a cost-effective solution for both semi-automatic operation and for integration into automated product lines. For operation compressed air of 4,5 bar is needed. 9.3 1 1 Long service life The ball-bearing guide bars are low-wearing. 2 2 Variable product heights The lifting cylinder allows labeling at different heights. Different stroke heights are available.
Accessories - Applicator A1000 9.4 Tamps Labels are applied on the tamp and held by vacuum. The applicator then moves the tamp with label to the product. Universal tamp pad The rasterized vacuum holes are covered by a foil and are pierced according to the label size. Tamp pads are manufactured according to the label size.
Applicator A3200 9.8 4 5 3 2 6 1 7 Applicator A3200 – Real time application The A3200 applicator is used to automatically apply labels that are printed with the A2+ / A4+ printer. A rotary cylinder allows positioning the label between 45° and 95° which is then placed on the product via short stroke cylinder. 1 Long service life The ball-bearing guides are low-wearing. 2 Variable angular position The rotary cylinder allows labeling on horizontal, inclined and vertical surfaces.
Accessories - mounting equipment Mounting foot (for A2+, A4+) For fastening the print and apply system and product holder. 10.1 1 Mounting plate The print and apply system is fastened on the mounting plate. 2 Profile Standard lengths are 40, 80, 120 mm. The aluminum square profile can also be manufactured in other lengths upon request. 3 Base plate For fastening the product holder Standard size: 500 x 255 mm. 10.2 10.
Software tools 11.1 J H 100 OR S l1;0,0,68,70,100 T 10, 10,0,5,pt20;sample B 10,20,0,EAN-13,SC2,401234512345 G 8,3.5,0;R:30,9,0.3;0.3 A1 Job Start Speed (100 mm / s) Orientation rotated by 180° Size of label (100x68 mm, gap 2 mm) Text object/font: Swiss bold, 20 pt Barcode EAN 13; size SC 2 Graphic, box 30 x 9 mm, Line weight 0,3 mm Number of labels (in this example 1) 11.
Printer drivers 11.7 WHQL certified Windows printer driver for Windows XP Windows Server 2003 Windows Vista Windows Server 2008 Windows 7 Windows Server 2008 R2 Windows 8 Windows Server 2012 Our printer drivers are officially certified and signed by Microsoft. They ensure optimum stability on your Windows operating system. 11.8 Apple-Mac OS X® driver * Alternatively, cab offers a CUPS-based printer driver for programs using Mac OS X.
Label software Powerful label software cablabel R2+ that is free of charge and specially designed for cab printers and print and apply systems. 11.9 Different fonts, barcode and graphics in variable heights, widths and printing directions can be used to produce the best possible label design. In addition to the loadable TrueType fonts available, cab printers also offer a large number of internal bitmap- and vector fonts.
Easy maintenance Label sensor If cleaning might come up the label sensor is unlocked and pulled out with slight finger pressure. Printhead The printhead may be exchanged in just a few steps. And no need of doing adjustments and settings. Print roller Three screws allow an easy and fast removing of the print roller for cleaning or replacement. No need for a service technician to perform routine maintenance.
Delivery program for label printers Art.-No. Hardware dpi Art.-No. 5954511 5954512 Label printer A2+ / Label printer A2+ / 300 300P Spare parts 5954105.001 Print head 2 / 300 5954575 5954578 Label printer A2+ / Label printer A2+ / 600 600P 5958686.001 Print head 2 / 600 5954500 5954505 Label printer A4+ / Label printer A4+ / 200 200P 5954081.001 Print head 4 / 203 5954501 5954506 Label printer A4+ / Label printer A4+ / 300 300P 5954072.
Delivery program for accessories 2.1 2.2 Art.-No. Special equipment Art.-No. Rewinding, unwinding labels 5954012.001 5954013.001 Metal cover A4+ Metal cover A6+ 5954108.001 Rewind guide plate RG2 for internal rewinding 5954190.001 5953700.001 Print roller DR4-M25 Rewind guide plate RG4 for internal rewinding 5953701.
Delivery program for accessories Art.-No. Applicators and dispensing module 9.1 5949281 5949265 Dispensing module A5104 Dispensing module A5106 9.2 5941345 All-round print and apply system 9.
cab delivery program Label printer EOS1 The compact for label rolls up to 155 mm Ø Label printer EOS4 The cost-effective for label rolls up to 210 mm Ø Label printer MACH4 The versatile for a smooth workflow Label printer A+ series The universal Label printer A+ M with centered material guide Label printer XD4 double-sided printing Textile printer A4+T For textile material Label printer XD4T double-sided printing of textile material Label printer XC4 two-color printing Label printer XC6 two-color p
Headquarters in Germany cab offices 520 partners in over 80 countries cab maintains a presence in the world's major economic areas. For current data, please refer to www.cab.de Germany cab Produkttechnik GmbH & Co KG Postfach 1904 76007 Karlsruhe Wilhelm-Schickard-Str. 14 76131 Karlsruhe Telefon +49 721 6626-0 Telefax +49 721 6626-249 www.cab.de info@cab.de Further partners on request France cab technologies s.a.r.l. 67350 Niedermodern Téléphone +33 388 722 501 www.cab.de/fr info.fr@cab.
