Technical data

9
Stand A 1600
For great stability the stand is made of aluminum
profiles so the print and apply system is ready for
use on any automated production line. Also it can
easily be adjusted in height and width to fit any
product.
The guide rollers allow for smooth movement and
transporting while the adjustable mounting pads
allow easy positioning for the print and apply sys-
tem for operation.
The print and apply system is mounted on a base
plate that is 10 mm thick and is fixed using only
a clamp.
Light Barrier
A light barrier or sensor can be mounted to auto-
matically recognize a product on a conveyor belt.
Interface Plug
Easily connected using simple clip screws.
Present Trigger/Foot Switch
The present trigger or foot switch can be used
for semi-automatic applications.
Lower Frame
The lower frame may be customized according
to the special requirements regarding width and
height. The print and apply system is positioned by
using two bolts. The exact position of the system
may be adjusted on a guide rail.