Technical data

External Unwinding of Labels

Label rolls up to 300 mm/11.81" diameter

The un-winder works with inside or outside

wound label rolls.

External Rewinding of Labels

Label rolls up to 300 mm/11.81" diameter

With the built-in power supply the re-winder is

operated independet to the printer. The guide is

adjustable to the individual label exit height of

serveral models of printers.

Adapter plate for A/M-Series

With the adapter plate the correct position of

the re- and un-winder to the printer ist fixed.

Direct Keyboard and Scanner

Connection for Stand-Alone Mode

With keyboard or scanner the printers can be used

without a PC in stand-alone mode.

The PC keyboard will be connected to the USB

Master interface of the printer. If keyboard and

scanner will be operated at the same time, a hub

is needed.

Label formats, fonts, standard texts and graphics

are stored on the CompactFlash-memory card.

Barcode Tester

The built-in scanner tests the barcodes directly

after printing. If the barcode is not readable the

printing process will be stopped at once so the

faulty label can be removed. The barcode tester

reads most linear barcodes positioned along the

printing direction.

External Operation Panel

When using the system in automated production

lines it is possible to connect additionally an external

operation panel. This may be used as desk top

or for integration. With a USB cable it is connected

to the USB Master interface of the printer (order

separatly).