Spec Sheet

7
2.10
2.9
2.8
2.11
7
Accessories
Cutter
The cutter is used to cut all printable materials.
Cutter
Cutting height from mm 10
Cuts/min. up to 200
Winding preferably outside
Monitoring cutter pivoted, final position not
reached
Brake for fanfold labels
The brake is used to tightly guide and precisely print fanfold
material
The brake for fanfold labels can not be installed with
EOS mobile.
External unwinder
When feeding, the material rolls are automatically centre-aligned.
The external unwinder can not be installed with EOS mobile.
External unwinder
Roll diameter up to 390 mm
Core diameter starting with 38 mm
Winding outside or inside
Roll weight max. 4 kg
Battery Pack with integrated charger
The battery pack is installed underneath the EOS mobile. Data
input is made in the stand-alone operation. Data transfer is
made via WLAN or Bluetooth.
For EOS mobile Battery Pack 2 Battery Pack 4
Nominal voltage 18 V
Capacity / power 2,1 Ah / 36 Wh 4,2 Ah / 72 Wh
Print capacity for labels 110 x 68 mm / 15% colour coverage
continuously up to 5.000 labels up to 10.000 labels
1 label per minute up to 500 labels/8 h up to 1.000 labels/16 h
Charging time max. 2 h 4 h
Charging voltage 100 -240 VAC 50/60 Hz