Spec Sheet

3
1
2
6
7 5 8
3
4
3
Common details
Printhead 203 or 300 dpi
The printhead can be easily removed
by hand for cleaning or replacement.
Drive roller
It can be removed for cleaning or
replacement without tools.
As small labels may cause friction
between printhead and print roller it is
recommended to use in this case narrow
print rollers with a width of 25, respec-
tively 50 mm ensuring a better
print image and extending the life of the
printhead.
7
8
4
1
5
2
6
3
Touchscreen – LCD display
Clearly designed for highest ease of use.
USB interfaces
2 USB interfaces on the operation panel, 1 USB
interface on the back for memory stick, service
key, WLAN, bluetooth, keyboard and scanner.
Roll holder
The label roll is inserted and centered automati-
cally when Margin Stop is pressed on and locked.
Ribbon retainer
The stop is adjustable to the foil width.
Gap or reflective sensor
The sensor position is adjustable by the red
knob via a spindle. The set position is
displayed with a LED.
Label guide
The guides are adjusted to the material
width with a knob.